P/N 36-651000-10 36-Pin SSOP-to-0.6 DIP Adapter
GENERAL SPECIFICATIONS * PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick * PADS: bare Cu protected with Entek(R) by Enthone or Omikron(R) white Sn to eliminate co-planarity concerns and solder bridges * MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * OPERATING TEMPERATURE: 221F [105C] * MALE PIN PLATING: 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] Ni per SAE-AMS-QQ-N-290 MOUNTING CONSIDERATIONS * Standard thru-hole
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
ORDERING INFORMATION
24-651000-10 24-651000-10-P = Panelized Version
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18065 Rev. AA
|
